TABS

Increase Safety and Reduce Cost

AP Tech offers a line of solid chemistry water treatment formulations in tablet form. TABS are used to treat water in solid chemistry programs and to boost  programs.

The tablet solutions provide a safe and convenient method for rapidly achieving correct start-up or maintenance dosing levels. They are designed to dissolve in water quickly, so it is possible to introduce products rapidly to your water treatment system.

TABS are used for initial water treatment system dosing prior to start-up, after any event that results in water treatment chemicals not being administered to the system, after a large amount of make-up water is added to the system, system sizing and general maintenance:

  • Cleaning Passivation, & Re-Charge (CPR)
  • Closed loop corrosion inhibitor level boost – available in nitrite and molybdate
  • PTSA tablets for determining system volume
  • YMP tablets for yellow metal corrosion protection (YMP-TABS)

Adding TABS to Water Treatment Programs

Boost your water treatment program with highly active chemistry that fits in the palm of your hand. Simply drop the solid chemistry TABS in your system and go.

We use the highest quality raw materials and components for our solid chemistry formulations. Due to the synergies between our solid products and those used in liquid programs, tablets can be used as a compliment to boost liquid programs.

Rather than cranking more liquids in or pouring in liquids by hand, solid chemistry TAB formulations are very simple and safe to add to a system and rapidly get it boosted.

Switch to the Convenience of Solids

Solid chemistry water treatment tablets can be stored on a shelf or even in the service consultant’s vehicle. They can help eliminate the challenges of handling and storing hazardous liquid chemicals.

Solid formulations are comparable and synergistic with liquid formulations. Safer to handle, tablets provide you the ability to rapidly boost, clean, or address issues proactively and responsively.

TABS are packaged in pails or boxes that are easily disposed of. Our formulations are safe to handle, can be shipped in the mail, save space in mechanical rooms, and eliminate the costs and risks associated with liquids.

Whether for preventative maintenance or to solve an immediate problem, TABS are a great fit.

PRODUCT NAME Condition Feed Rate Description Control Test
Cleaner
5 TABS per 50 gallons of water*

BOIL-TABS are used for pretreatment of new or re-piped boilers. The product contains caustic, soda ash, borax, and phosphate.

N/A
Inhibitor
One TAB (puck size) per 1,000 gallons of system water capacity doses 34.4 ppm nitrite (as NO2) or one pound of TABS (pellets) per 1,000 gallons of system water capacity doses 68.8ppm nitrite (as NO2)*
L1-C-TABS are a proprietary water treatment corrosion inhibitor for hot and chilled closed water systems. Product contains Sodium Nitrite, Borax, Azole, and Polymer.
Nitrite, Sodium Nitrite
Inhibitor
One Tablet per 1,000 gallons of system water capacity doses 5.1ppm*
CMO-C-TABS are a proprietary water treatment corrosion inhibitor for hot and chilled closed water systems. The product contains Sodium Molybdate, Borax, and Azole.
Molybdate, Molybdenum
L5-C-TAB
Cleaner
8 TABS per 1,000 gallons of system water*
L5-C-TABS are cleaner and scale remover designed to remove iron deposits and build-up in piping and equipment in water systems. The product contains chelant and phosphonate.
N/A
Cleaner
5 TABS per 50 gallons of water volume*
L6-TABS are used for pre-commission cleaning of a new or re-piped closed loop system. The product contains caustic, soda ash, borax, and phosphate.
N/A
PTSA -TABS
Specialty: System Sizing
1 TAB increases PTSA by 100 ppb per 1,000 gallons of water*
N/A
YMP-TAB
Inhibitor
One TAB per 1000 gallons of system water capacity doses 1ppm of TTA*
YMP TABS are a propietary yellow metal corrosion inhibitor designed primarily for cooling tower and closed loop systems needing extra yellow metal corrosion control. Contains Tolytriazole.
TTA